Equipment Rental‎ > ‎

Miscellaneous


Need Delivery or Trailer Rental (special rates) to haul your Rental Products?
Please review all terms and conditions on your Rental Equipment Contract

Bolt Cutters
  • 18" - 36"
Brick Cutters
  • Manual Guillotine Style
Compaction
  • Manual Hand Tamper - 10 x 10
Fencing
  • Manual Post Pounder
  • Post Maul
  • Wire Stretchers
  • Fencing Pliers
Grinders
  • Angle Grinder 4", 5" or 7"
  • Electric or Air Die Grinder
Hoists
  • Cable Come-a-long
  • 3/4 Ton Chain Come-a-long
  • 1 1/2 Ton Chain Come-a-long
  • 3 Ton Chain Hoist
Jacks
  • Axle Stands (Pair) 3 or 6 Ton
  • Bottle Jacks (2 Ton, 12 Ton, or 20 Ton)
  • Floor Jacks (2 1/2 Ton)
  • Jack-Alls
Magnets
  • Roller Style, 24" Wide
 Metal Detector - Handheld
  • Used for all types of metal
  • Jewellery, silver, gold, coins, etc.
 
Moving Equipment
  • Appliance Dolly
Tie-Down Equipment
  • Boomers
  • Chains
  • Clevises
  • 1" or 2" Ratchet Straps
  • 1" Pull Straps
  • Heavy Duty Slings
  • Heavy Duty Tow-Rope w/ Chain ends
Tools (Automotive)
  • Battery Chargers
  • Car Buffer
  • Coil Spring Compressor
  • Strut Compressor
  • Value Spring Compressor
  • Anti-freeze Tester, Ball Joint Tools, Battery Tester
  • Bearing Pullers, Bearing Race & Seal Driver
  • Body Repair Kit, Booster Cables, Compression Tester
  • Electrical Tester, Filter Wrench, Gear Pullers
  • Balance Puller, Piston Ring Compressor
  • Cylinder Honer
Tools (Miscellaneous)
  • Air Chisel
  • Glue Gun
  • Electric Planer
  • Electric Router - c/w 1 bit
  • Electric Shearer (Metal/Tin)
  • Pop Rivet Gun
  • Tin Snips, Wood Bits/Chisels, Caulking Guns
  • Chalk Line, C-Clamps, Ez-Load Banjo Tamper, Hammer Tacker
  • Hand Plainer, Hand Sander, Hand Saws, 2" or 4" Levels
  • Miter Box c/w Saw, Nail Pullers, Squares, Tape Measures
  • Taping Knife, Wallboard Saw, Roofing Shovels, Shovels, 
  • Spades, Sledge Hammers, Axes, Picks, Crow Bars
  • Ground Rod Pounders, Torx Screwdrivers

Wrenches
  • Box Wrenches - Open End, 3/8" to 1 1/4"
  • Box Wrenches - Open End 1 1/4 to 2"
  • Crescent Wrenches - 6", 8", 10", 12", 15", or 18"
  • Drive Socket Set - 3/8", 1/2", 3/4", or 1"
  • Flex Handle
  • Impact 3/8" Air
  • Impact 1/2" Air or Electric
  • Pipe Wrenches - 8", 18", 24" or 36"
  • Torque - 3/8" (Up to 80 lbs)
  • Torque - 1/2" (Up to 250 lbs)